5 Apr 2011

SSL Enabling OWA 2003 using your own Certificate Authority



1. Configuring the CA
2. Creating Certificate Request
3. Getting the Pending Request accepted by our CA
4. Appending the Certificate to the Default Website
5. Enable SSL on the Default Website
6. Testing our SSL enabled Default Website




1. Configuring the Certificate Authority

The first thing to do is to decide which server should hold the Certicate Authority (CA) role, it could be any server as long as it’s at least a member server. If you have a single box setup, such as a Small Business Server (SBS), the decision shouldn’t be very hard.

Note:
In order to add the Certificate Service Web Enrollment component (subcomponent to CA), which we’re going to use in this article, the server needs to be running IIS, so if you haven’t already done so,  install IIS before continuing with this article. If you plan on installing the CA  component on the Exchange server itself, then there’s nothing to worry about, because as you know, Exchange 2003 relies heavily on IIS, which means It’s already installed.

To install the CA component, do the following:
  • Click Start > Control Panel > Add or Remove Programs
  • Select Add/Remove Windows Components
  • Put a checkmark in Certificate Services
Below screen will popup as a warning, just click Yes > then Next
We now have to select what type of CA to use, choose Enterprise root CA and click Next
In the following screen we have to fill out the Common name for our CA, which in this article is mail.testdomain.com.
Leave the other fields untouched and click Next >
We now have the option of specifying an alternate location for the certificate database, database log, and configuration information. In this article we will use the defaults, which in most cases should be just fine.
Now click Next >
The Certificate Service component will be installed, when it’s completed, click Finish


2. Creating the Certificate Request

Now that we have installed the Certificate Services component, it’s time to create the Certificate Request for our Default Website. We should therefore do the following:
  • Click Start > Administrative Tools > Internet Information Services (IIS) Manager
  • Expand Websites > Right-click Default Website then select Properties
  • Now hit the Directory Security tab
  • Under Secure Communications click Server Certificate…
As we’re going to create a new certificate, leave the first option selected and click Next >
Because we’re using our own CA, select Prepare the request now, but send it later, then click Next >
Type a descriptive name for the Certificate and click Next >
We now need to enter our organization name and the organizational unit (which should be pretty self-explanatory),  then click Next >
In the next screen we need to pay extra attention, as the common name reflects the external FQDN (Fully Qualified Domain Name), to spell it out, this is the address external users have to type in their browsers in order to access OWA from the Internet.
Note: As many (especially small to midsized) companies don’t publish their Exchange servers directly to the Internet, but instead runs the Exchange server on a private IP address, they let their ISP’s handle their external DNS settings. In most cases the ISP creates a so called A record named mail.domain.com pointing to the  company’s public IP address, which then forwards the appropriate port (443) to the Exchange servers internal IP address.

When your have entered a Common Name click Next >
Now it’s time to specify the Country/Region, State/Province and City/locality, this shouldn’t need any further explanation, when you have filled out each field, click Next >
In the below screen we have to enter the name of the certificate request we’re creating, the default is just fine, click Next >
In this screen we can see all the information we filled in during the previous IIS Certificate Wizard screens, if you should have made a mistake, this is your last chance to correct it. If everything looks fine click Next >
And finally we can click Finish.


3. Getting the Pending Request accepted by our Certificate Authority

Now that we have a pending Certificate Request, we need to have it accepted by our CA, which is done the following way:
  • On the server open Internet Explorer
  • Type http://server/certsrv
Note: In order to access the Certsvr virtual folder, you may be prompted to enter a  valid username/password, if this is the case use the Administrator account. When you have been validated the Windows 2003 Server will most probably block the content of the CertSrv virtual folder, which means you wil  have  to add it to your trusted sites in order to continue.

Now that you’re welcomed by the Certificate Services, select Request a Certificate

Click advanced certificate request
Under Advanced Certificate Request click Submit a certificate request by using a base-64-encoded CMC or PKCS #10 file, or submit a renewal request by using a base-64-encoded PKCS #7 file
Now we need to insert the content of the certreq.txt file we created earlier, you can do this by clicking the Browse for a file to insert or by opening the certreq.txt file in notepad, then copy/paste the content as shown in the screen below, then click Submit >
Now select Base 64 encoded then click Download certificate

Click Save
Choose to save the certnew.cer on the C: drive > then click Save
Close the Microsoft Certificate Services IE window.


4. Appending the Certificate to the Default Website

Okay it’s time to append the approved Certificate to our Default Website, to accomplish this we need to do the following:
  • Click Start > Administrative Tools > Internet Information Services (IIS) Manager
  • Expand Websites > Right-click Default Website then select Properties
  • Now select the Directory Security tab
  • Under Secure Communications click Server Certificate… > then Next
Select Process the pending request and install the certificate > click Next >
Unless you have any specific requirements to what port SSL should run at, leave the default (443) untouched, then click Next >
You will now see a summary of the Certificate, again if you should have made any mistakes during the previous wizard screens, this is the final chance to correct them, otherwise just click Next >
The Certificate has now been successfully installed and you can click Finish


5. Enabling SSL on the Default Website

We have now appended the Certificate to our Default Website, but before the data transmitted between the clients and the server is encrypted, we need to click the Edit… button under Secure Communications.

Here we should put a checkmark in Require Secure Channel (SSL) and Require 128-bit encryption just like below:
Now click OK.


6. Testing our SSL enabled Default Website

Now that we have gone through all the configuration steps necessary to enable SSL on our Default Website, it’s time to test if our configuration actually works.
From the server (or a client) open Internet Explorer, then type:
http://exchange_server/exchange
You should get a screen similar to the one shown below:
This is absolutely fine, as we shouldn’t be allowed to access the Default Website (and any virtual folders below) through an unsecure connection. Instead we should make a secure connetion which is done by typing https, therefore type below URL instead:
https://exchange_server/exchange
The following box should appear:
Note: You may have noticed the yellow warning sign, this informs us The name on the security certificate is invalid or does not match the name of the site. Don’t worry there’s nothing wrong with this, the reason why it appears is because we aren’t accessing OWA through the common name, which we specified when the certificate was created. When you access OWA from an external client through mail.testdomain.com/exchange, this warning will disappear.
Click Yes
You will now be prompted for a valid username/password in order to enter your mailbox, for testing purposes just use the administrator account, like shown below:
Now click OK
We should now see the Administrator mailbox.
Notice the yellow padlock in the lower right corner, a locked padlock indicates a secure connection, which means OWA now uses SSL.

Final words

Even though it’s possible to run your OWA environments without securing it with a SSL certificate, I strongly advise against doing so, as this would mean any traffic send between the external OWA clients, and the Exchange server would be sent in cleartext (this includes the authentication process). As you now know SSL provides us with 128-bit encryption, but be aware enabling SSL in your OWA  environment isn’t an optimal security solution, in addition to enabling SSL, you should at least have some kind of firewall (such as an ISA server) placed in front of your Exchange server(s). You might also consider enabling the new Exchange 2003 functionality Forms Based Authentication, which provides a few additional benefits such as a new logon screen, which, among other things, uses session cookies to make the OWA sessions more secure, unfortunately the Forms Based Authentication functionality is out of the scope of this article, but I will at some point of time in the near future write another article covering this funtionality.
That was it for this time, I hope you enjoyed the article.
http://www.msexchange.org/tutorials/SSL_Enabling_OWA_2003.html

Total Pageviews